traduccion de como construir un edificio

1.CHECK FIELD: We analyzed the resistance, the peculiarities of the terrain and depth.

2. EARTHWORKS AND TRENCHING: It paves the way correcting unevenness and emptying spaces in areas which are to stand the ground.

3. FOUNDATIONS: The blocks (concrete cubes that are placed on the pillars) are built. When land is not very resistant, reinforced concrete slabs are constructed. If the firm is very deep, the piles (concrete columns high) are used. The water-drainage chests are also built.

4. CONSTRUCTION OF THE STRUCTURE: Depending on the type of building, the structure rests on pillars (iron or concrete drive) or on walls.Above the pillars and walls, beams and slabs are placed.When we build the floors must take into account the elevators, stairwells …

5. RISING OF THE CLOSING: The closings are the partitions that cover the exterior of the building and separate the interior spaces. When we build, we must consider the gaps of doors, windows and small courtyard, where they are located the pipes, the cables...

6. PLACEMENT FACILITIES: The hot water pipes and cold, gas, heating, electricity, TV... are laid and attached.

7. FINISH: The floors, plaster, paints, varnishes, the cerrejería, the paneling, the doors ... are placed.

tecnologia force

bridge

1- Traction effort

2- Traction effort

3- Compression effort

4- Flexion effort
Swin

1- Flexion effort

2- Flexion effort

3- Compression effort

4- Flexion effort

5- Compression effort

6- Traction effort

Definition of a technical project:

Definition of a technical project: the different activities carried out since one problem arises until we are able to solve it. This method of work consists of the following steps:

1. Define the problem: the situation that need to be solved is clearly defined.
2. Look for solutions: searching for information, analyzing similar objects, raising different solutions and choosing the most appropriate one.
3. Design the object: in this step the idea is set and it is described in written and graphic form.
4. Planning: it has to do with anticipating the jobs that are going to be carried out, handing out the job, obtaining the materials and preparing the tools
5. Construction: it is necessary to manufacture the different parts separately and later put them together.
6. Evaluation: one tests how the object works and corrects the design if necessary.
7. Communication of results: it is necessary to present a technical report in which one describes the whole process.

traducción translate

Definición de proyecto técnico: las diferentes actividades llevadas desde que surge un problema hasta que nosotros podemos solucionarlos. Este método de trabajo tiene los siguientes pasos:

1. definir el problema: la situación que necesita ser resuelta esta claramente definida
   
2. buscar soluciones: buscar información, analizar objetos similares, se muestran las diferentes soluciones y se elige la más apropiada
   
3. diseñar el objeto: en este paso la idea esta en juego y se describe y se da la forma grafica
   
4. planificación: se hace la revisión del trabajo que vas a hacer, se reparte el trabajo, se obtienen los materiales y se preparan las herramientas
   
5. construcción: es necesario fabricar las diferentes partes separadas y después juntarlas todas
   
6. evaluación: se hace una prueba con los objetos de trabajo y se corrige el diseño si es necesario
   
7. comunicación de los resultados: es necesario presentar un trabajo técnico que describe todo lo necesario del proceso

Technical project

Definition of a technical projectn (click here)